Education

Expertise

研討會論文
1.Yeau-Ren Jeng and B. J. Hamrock, 1985, “Hydrodynamic Lubrication in Viscous-Rigid Regime,” ASLE Annual Meeting in Las Vegas, Nevada, May 6-9

2.Yeau-Ren Jeng and B. J. Hamrock, 1987, “An Improved Method for Elastic Deformation in Elliptical Conjunctions,” ASLE Annual Meeting in Anaheim, California, May 11-14

3.Yeau-Ren Jeng, 1989, “Impact of Surface Roughness on Tribological Behavior,” STLE/ASME Joint Conference, Fort Lauderdale, Florida, Oct. 16-19

4.Yeau-Ren Jeng, 1991, “An Analytical Approach for the Lubrication Analysis of Piston Ring,” STLE Annual Meeting in Montreal, Quebec, Canada, April 29-May 2

5.Yeau-Ren Jeng, 1991, “Engine Tribology and Engine Component Design,” Workshop on Lubrication Design of Engine Components, Warren, Michigan, June 19-21

6.Yeau-Ren Jeng, 1992, “An Integrated Approach for Piston-Ring Lubrication,” SAE International Congress, Detroit, Michigan, Feb. 24-28

7.Yeau-Ren Jeng, 1992, “Surface Roughness Measurement and Effects on Tribological Performance,” International Conference on Engineering Surfaces, San Francisco, California, Oct. 19-22

8.Yeau-Ren Jeng, 1995, “A Surface Metrology for Surface Height Distributions,” STLE Annual Meeting, Chicago, Illinois, U. S. A., May 14-19

9.Yeau-Ren Jeng, 1996, “Lubrication Design of a Piston Ring Pack,” International Symposium of Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii

10.Yeau-Ren Jeng, 1996, “Characterization and Effects of Height Distribution Shapes,” STLE Annual Meeting, Cincinnati, Ohio, U.S.A., May 19-23

11.Yeau-Ren Jeng, and C.C. Gao,1996, “Running-in Wear Simulation for Surfaces from Different Manufacturing Processes, Part Ⅰ: Surface Metrology for Surfaces from different Manufacturing Processes,” Proceedings of the Thirteen National Conference of the Chinese Society of Mechanical Engineers

12.Yeau-Ren Jeng, and C.C. Gao,1996, “Running-in Wear Simulation for Surfaces from Different Manufacturing Processes, Part Ⅱ: Simulation of Running-in Wear,” Proceedings of the Thirteen National Conference of the Chinese Society of Mechanical Engineers

13.Yeau-Ren Jeng, 1997, “Changes of Surface Texture during Adhesive Wear,” STLE Annual Meeting, Kansas City, Missouri, U.S.A. May 18-22

14.Yeau-Ren Jeng, 1997, “Engine Tribology Developments in the Far East,” PANEL KEYNOTE SPEAKER, STLE Annual Meeting, Kansas City, Missouri, U.S.A. May 18-22

15.Yeau-Ren Jeng, 1997, “The Study of Ball Bearing Load, Fatigue Life and Heat Generating under High Speed Operation,” World Tribology Congress, London, United Kingdom, Sept. 8-12

16.Yeau-Ren Jeng, 1998, “Effects of Preload on the Performance of High Speed Bearings,” 11th International Colloquium Tribology, Stuttgart, Germany, Jan. 13-15

17.Yeau-Ren Jeng, 1998, “Investigation of Ball Bearing Performance under Oil-Air Lubrication,” STLE Annual Meeting, Detroit, Michigan, U.S.A., May 18-21

18.Yeau-Ren Jeng, 1998, “Ball Bearing Temperature Rise under Oil-Air Lubrication System,” ASME/STLE International Tribology Conference, Toronto, Ontario, Canada, October 25-29

19.J. N. Aoh, Yeau-Ren Jeng, E. L. Chu, L. T. Wu and T. S. Wu, 1998, “On the Wear Behavior of Stellite Alloys at Elevated Temperature,” Taiwan International Welding Conference, Taipei, Taiwan, Sept. 7-9

20.Yeau-Ren Jeng, and J. N. Aoh, 1998, “Effect of Interface Phenomena on Quality of Ultrasonic Wire Bonding,” ASME Winter Meeting, Anaheim, CA, U.S.A., Nov. 15-20

21.Yeau-Ren Jeng, and C. H. Chang, 1998, “Thermodynamics Properties of R-410A and R-407C,” The Eleventh International Symposium on Transport Phenomena, National Tsing Hua University, Hsinchu, Taiwan, Nov. 30-Dec. 3

22.Yeau-Ren Jeng, and P. Y. Huang, 1998, “Effect of Oil-Mist Lubrication on Temperature Rise of Ceramic Ball Bearings,” The Eleventh International Symposium on Transport Phenomena, National Tsing Hua University, Hsinchu, Taiwan, Nov. 30-Dec. 3

23.朱恩樂, 敖仲寧, 鄭友仁, 吳隆佃, 吳春森, 1998, “鋼鐵連鑄輥輪銲覆層應用研究,” 中國機械工程學會第15屆研討會, 台南市, Nov. 27-28

24.J. H. Aoh, Yeau-Ren Jeng, E. L. Chu, and L. T. Wu, 1999, “On the Wear Behavior of Surface Cladding Layers under High Temperature,” 12th International Conference on Wear of Materials, Atlanta, GA. U.S.A. April 25-29

25.Yeau-Ren Jeng, and C.C. Gao, 1999, “Topographical Changes of Sliding Wear for Non-Gaussian Surfaces,” STLE Annual Meeting, Las Vegas, Nevada, U.S.A, May 23-27

26.C.C. Ling, T.N. Shiau, Yeau-Ren Jeng, T.S. Chen, W.H. Hsieh, Y.W. Hwang, D.S. Liu, 1999, “The Development of a High Speed Spindle for Machining Center,” Symposium in High-Speed and High Precision Machining, Mach 15-16, Tainan, Taiwan

27.Yeau-Ren Jeng, and C. C. Gao, 1999, “Effects of Wear Particles on Topographical Changes during Sliding Wear,” Herbert S. Cheng Symposium, STLE/ASME Tribology Conference, Kissimmee, Florida, U.S.A., Oct. 10-13

28.Yeau-Ren Jeng, and J. Horng, 1999, “Investigation of Contact Characteristics Affecting Ultrasonic Wire Bonding in Microelectronics,” ChipMOS Technical Symposium on Advanced Packaging, Hsinchu, Taiwan, Oct. 22

29.Yeau-Ren Jeng, and Z. W. Lin, 1999, “Experimental Study of Changes of Surface Topography during Running-in,” National Conference of the Chinese Society of Mechanical Engineers, Hsinchu, Taiwan, Dec. 3-4

30.Yeau-Ren Jeng, Shen-Jenn Hwang, Jinn-An Shieh, Jin-Shang Liou, C.S. Lin, 2000, “Lubrication Performance of Gear Lubricants with Different Additives,” 6th Annual Fuels and Lubricants Conference, Singapore, January 25-28

31.Yeau-Ren Jeng, Shen-Jenn Hwang, 2000, “Experimental Study on the Performance of Gear Lubricants,” STLE Annual Meeting, Nashville, Tennessee, U.S.A., May 7-11

32.Yeau-Ren Jeng, 2000, “Topographical Changes of Engine Bores during Engine Running in,” International Fuels & Lubricants Meeting, Paris, France, June 19-22

33.Yeau-Ren Jeng and J. Horng, 2000, “Investigation of Ultrasonic Wire Bonding in Microelectronic: A Microcontact Perspective,” International Tribology Conference, Nagasaki, Japan, Oct. 29- Nov. 2

34.敖仲寧, 鄭友仁, 丁榮豐, 2000, “銅晶片構裝銲線製程初探”, 中國機械工程師學會研討會, 高雄市, Dec. 9-10

35.鄭友仁, 陳津佑, 2000, “電子構裝熱音波銲線製程之界面現象探討,” 中國機械工程師學會研討會, 高雄市, Dec. 9-10

36.蔡宏榮, 鄭友仁, 2000, “晶圓化學機械研磨之顆粒研磨漿的磨潤分析,” 全國力學會議, 中壢、桃園, Dec. 9-10

37.Yeau-Ren Jeng, S. J. Hwang, Z. H. Fong, and J. A. Shieh, 2001, “Effects of Gear Oil Additives on Lubrication Characteristics between Steel Rollers,” International Conference on Wear of Materials, Vancouver, British Columbia, Canada, April 22-26

38.J. H. Aoh, and Yeau-Ren Jeng, 2001, “Effects of Laser Hardening on Casting Iron and Cladding with Co-Based Alloys on Tribology Performance,” International Conference on Wear of Materials, Vancouver, British Columbia, Canada, April 22-26
S. H. Shyu, and Yeau-Ren Jeng, 2001, “An Efficient General Fluid-Film Lubrication Model for Plane Slider Bearings,” STLE Annual Meeting, Orlando, Florida, U. S. A., May 20-24

39.Yeau-Ren Jeng, 2001, “Study of Ultrasonic Wire Bonding in Electronic Interconnection from Microcontact Viewpoint,” STLE Annual Meeting, Orlando, Florida, U.S.A., May 20-24

40.鄭友仁，2001, “由微觀界面現象探討微電子之熱音波銲線製程,” 海峽兩岸製造技術研討會,大陸大連市, Sept. 3-5

41.鄭友仁, 蔡秉錡, 2001, “鐵磁薄膜之奈米摩擦與碎形分析,” 材料年會, 台中, Nov. 23-24

42.Yeau-Ren Jeng, P. C. Tsai and T. H. Fang, 2001, “Nanofriction and Fractal Analysis of Ferrite Magnetic Thin Films,” Proceedings of Society of Manufacturing Engineers

43.鄭友仁, 蔡秉錡, 2001, “壓電薄膜之奈米量測與碎形分析,” SEM國際工程學會中華民國分會年會暨精密機械製造研討會, Nov. 3

44.鄭友仁, 陳建廷, 2001, “表面接觸熱傳導之理論模式與實驗驗証,” 中國機械工程師學會研討會, 台北市, Dec. 7-8

45.Yeau-Ren Jeng, Z. W. Lin and D. H. Shyu, 2002, “Measurement of Microscopic Wear for General Surfaces,” STLE Annual Meeting, Houston, Texas, U.S.A. May 19-24

46.Yeau-Ren Jeng, 2002, “An Elliptical Microcontact Model Considering Elastic, Elastoplastic and Plastic Deformation,” International ASME/STLE Tribology Conference, Oct. 27-30

47.Yeau-Ren Jeng, P. C. Tsai and T. H. Fang, 2002, “Molecular Dynamics Study on Mechanical Properties of Caron Nanotube,” Proceedings of the 19th National Conference of the Chinese Society of Mechanical Engineers, Huwei, Taiwan, Nov. 29-30

48.Yeau-Ren Jeng and J. T. Chen, 2002, “Thermal Contact Conductance of Coated Surfaces,” Proceedings of the 19th National Conference of the Chinese Society of Mechanical Engineers, Huwei, Taiwan, Nov. 29-30

49.Yeau-Ren Jeng, P. Y. Du and Y. Y. Pon, 2002, “Investigation on properties of Bi-direction pumping droplet mist ejection apparatus,” Proceedings of the 19th National Conference of the Chinese Society of Mechanical Engineers, Huwei, Taiwan, Nov. 29-30

50.Yeau-Ren Jeng, P. C. Tsai and T. H. Fang, 2003, “Molecular dynamics simulations on tensile mechanical properties of single-walled carbon nanotubes,” Symposium on Nano Device Technology, Hsinchu, Taiwan, March 21

51.Yeau-Ren Jeng and J. N. Lin, 2003, “Investigation of Thermosonic Wire Bonding in Microelectronics from the Perspective of Interfacial Phenomena,” STLE Annual Meeting, New York, U.S.A., April 28 – May 1

52.Yeau-Ren Jeng, 2003, “Strategy to Cultivate the Manpower in Traditional Disciplines for High-Tech Industry,” International Conference on Engineering Education, Valencia, Spain, July 21-25

53.鄭友仁, 黃培堯, 2003, “晶圓研磨製程之研磨機制與材料移除率模式：微觀接觸力學之探討“, 第三屆精密機械製造研討會, 高雄市, Nov. 15

54.鄭友仁, 徐旭華, 邱子庭, 梁勝明, 廖俊杰, 2003, “非牛頓熱液動力頸軸承潤滑研究,” 中國機械工程師學會研討會, 台北市, Dec. 5-6

55.鄭友仁, 方得華, 李泳達, 2003, “奈米碳管探針之實驗製備與特性研究,” 中國機械工程師學會研討會, 台北市, Dec. 5-6

56.Yeau-Ren Jeng, H. J, Tsai, 2003, “Elastic/Inelastic Grain Collision for Grain Flow with Rough Surfaces,” National Conference of the Chinese Society of Mechanical Engineers, Taipei, Dec. 5-6

57.Yeau-Ren Jeng and P. Y. Huang, 2003, “A Micro-Contact Wear Model for Material Removal in Chemical Mechanical Polishing,” The 27th Conference on Theoretical and Applied Mechanics, Tainan, Taiwan, Dec. 12-13

58.鄭友仁, 蔡宏榮, 2003, “晶圓化學機械研磨之研磨顆粒特性探討,” 第27屆全國力學研討會, 台南市, Dec. 12-13

59.鄭友仁, 2004, “微奈米機光電技術,” 磨潤會議, 虎尾科技大學, April 22

60.Yeau-Ren Jeng, 2004, “Load Capacity for Infinitely-Wide Plane Slider Bearings in Turbulent Thermohydrodynamic Regime,” STLE Annual Meeting, Toronto, Ontario, Canada, May 17-20

61.Yeau-Ren Jeng, 2004, “An Interdisciplinary International Collaboration in Nano-structured Property and Nano-scale Contouring Measurement Research and Education,” International Conference on Engineering Education and Research, Olomouc and Bouzov Castle, Czech Republic, June 27-30

62.鄭友仁, 2004, “Nanoindentation for the Characterization of Mechanical Property at the Nanoscale,” 微奈米研討會, 成功大學, Sept. 17
Yea-Ren Jeng, 2004, “Study of Nanoindentation using FEM Atomic Model,” ASME/STLE International Tribology Conference, Long Beach, California, U.S.A., Oct. 24-27

63.鄭友仁, 2004, “Nanoindentation for the Characterization of Mechanical Property at the Nanoscale” 第四屆海峽兩岸製造技術研討會, 大陸杭州, Nov. 4-5

64.鄭友仁, 2004, “化學機械研磨製程材料移除率與溫昇之研究,” 專題講演, 成功大學奈微米工程研究所, Nov. 17
21

65.鄭友仁, 2004, “化學機械研磨製程材料移除率與溫昇之研究,” 精密研磨產學合作研討會, 嘉義吳鳳科技學院, Nov. 18

66.Yeau-Ren Jeng and P. Y. Huang, 2004, “On the Role of Abrasive Particle Effects during Chemical Mechanical Polishing: A Microcontact Phenomena Perspective,” The 28th Conference on Theoretical and Applied Mechanics, Taipei, Taiwan, Dec. 12-13

67.鄭友仁, 2004, “Nanoindentation for the Characterization of Mechanical Property at the Nanoscale,” 奈米科技與應用國際研討會, 嘉義, Dec. 14

68.鄭友仁, 2004, “表面粗度力學之理論及其在半導體製程上的應用:由巨觀到微觀,” 專題講演, 新竹清華大學動力機械系, Dec. 16

69.Yeau-Ren Jeng, Chia-Chen Chen, Hsin-Fong Lia and Shiuh-Hwa Shyu, 2005, “Lubrication Rheology for Ultra Thin Polymer Solutions: A Molecular Dynamics Study,” The Celebration of Professor C. K. Chen’s 70th Birthday on the Chinese Society of Mechanical Engineers, Kaohsiung, Taiwan, Nov. 25

70.Yeau-Ren Jeng, 2005, “A Curriculum Program on Electronics Packaging Developed from Academic Expertise Survey for Electronic Packaging Technology,” International Conference on Engineering Education and Research, Tainan, Taiwan, Mar. 1-5

71.Yeau-Ren Jeng and P. Y. Huang, 2005, “A Material Removal Rate Model Considering Interfacial Micro-Contact Wear Behavior for Chemical Mechanical Polishing,” Proceedings of WTC2005, World Tribology Congress III, Washington, D.C., U.S.A., Sept. 12-16

72.Yeau-Ren Jeng and H. J. Tsai, 2005, “Characteristics of Powder Lubricated Finite-Width Journal Bearings: A Hydrodynamic Analysis,” Proceedings of WTC2005, World Tribology Congress III, Washington, D.C., U.S.A., Sept. 12-16

73.Yeau-Ren Jeng, N. Dedy, M. Kulkarni, H. Liang and P. Y. Huang, 2005, “NanoParticle Interaction During Chemical-Mechanical Polishing,” Proceedings of WTC2005, World Tribology Congress III, Washington, D.C., U.S.A., Sept. 12-16

74.Yeau-Ren Jeng, S. J. Huang and K. F. Liu, 2005, “A Wear Study of the Diamond-like Carbon Films on Alloys for Orthopedic Applications,” Proceedings of WTC2005, World Tribology Congress III, Washington, D.C., U.S.A., Sept. 12-16

75.鄭友仁, 黃培堯, 2005, “研磨顆粒尺寸對精密研磨之影響,” 第二屆磨潤暨材料科技研討會, 台南, 台灣, Sept. 30

76.Yeau-Ren Jeng, 2005, “Characterizing Mechanical Property of Nano-Structures,” Japan-Taiwan Workshop on Mechanical and Aerospace Engineering, Hualien, Taiwan, Nov. 28-29

77.Yeau-Ren Jeng and Pay-Yau Huang, 2005, “An Experimental Study on the Effects of Abrasive Particle Sizes on Polishing Phenomena,” 2005 International Conference on Advanced Manufacture, Taipei, Taiwan, Nov. 28–Dec. 2

78.Yeau-Ren Jeng and S. J. Hwang, 2005, “Predictive Modeling of Scuffing Performance of Gear Oil with MoDTC Using Response Surface Methodology,” 2005 International Conference on Advanced Manufacture, Taipei, Taiwan, Nov. 28–Dec. 2

79.H. J. Tsai, C. C. Chang, Yeau-Ren Jeng and S. L. Chen, 2006, “The Characteristic of Abrasive Particle in Chemical-Mechanical Polishing,” 2005 International Conference on Advanced Manufacture, Taipei, Taiwan, Nov. 28–Dec. 2

80.Yeau-Ren Jeng, C. C. Su and C. M. Tan, 2005, “An Investigation of Nanoscale Tribological Characteristics for Different Geometrical Sliding Systems,” 2005 International Conference on Advanced Manufacture, Taipei, Taiwan, Nov. 28–Dec. 2

81.Yeau-Ren Jeng and Pay-Yau Huang, 2006, “Impact of Abrasive Particles on the Material Removal Rate in CMP,” 第五屆海峽兩岸製造技術研討會, 高雄市, 台灣, April 24-25

82.Yeau-Ren Jeng, 2006, “A Two-Dimensional Navier-Stokes Based Model for Journal-Bearing Problems,” STLE Annual Meeting, Calgary, Alberta, Canada, May 7-11

83.Yeau-Ren Jeng, 2006, “Development of Surface Contact Mechanics and Its Applications: From Macro to Nano,” General Motors Research, Warren, Michigan, U.S.A., Aug. 23-24

84.Yeau-Ren Jeng, 2006, “The Development of Nano-Mechanics and Its Applications to the Characterization of Mechanical Property of Nano-Structures,” National Research Council-Integrated Manufacturing Technologies Institute, London, Ontario, Canada, Aug. 25-29

85.Yeau-Ren Jeng and Shin-Rung Peng, 2006, “Elastic-Plastic Contact Behavior Considering Asperity Interactions for Surfaces with Various Height Distributions,” STLE/ASME International Joint Tribology Conference, San Antonio, Texas, U.S.A., Oct. 22-25

86.Yeau-Ren Jeng, 2007, “Formulations of Performance Parameters for Adiabatic Infinitely Wide Journal Bearings in Turbulent Isothermal and THD Regimes,” STLE 62nd Annual Meeting, Philadelphia, U.S.A., May 6-10

87.Yeau-Ren Jeng and P. Y. Huang, 2007, “表面粗度接觸力學在微奈米製造之應用：由巨觀到微觀,” the 6th Cross-Strait Workshop on Nanoscience and Nanotechnology, 古城寶雞, 山西, Aug. 17-22

88.Yeau-Ren Jeng, C. P. Mao, T. T. Lin and D. B Shieh, 2007, “Contact Mechanics Study in Biotribology: A Tissue Engineering Example,” STLE /ASME International Joint Tribology Conference, California, U.S.A., Oct. 22-27

89.V. I. Semenov, L. Sh. Shuster, C. V. Chertovskikh, Yeau-Ren Jeng, S. J. Huang, Y. Zh. Dao and S. J. Hwang, 2007, “Tribology of Composite Materials on the Basis of Magnesium Alloy with Powder Filler of Sic,” Serbia Tribology 2007, 10th International Conference on Tribology, Sustainable Development in Industry by Applying Tribology Knowledge, pp. 81-84 (SCI)

90.W. Y. Jywe, Yeau-Ren Jeng, Y. F. Teng, H. S. Wang, and C. H. Wu, 2007, “Development of the Nano-Measuring Machine Stage,” IEEE IECON 2007, The 33rd Annual Conference of the IEEE Industrial Electronics Society, The Grand Hotel, Taipei, Taiwan, Nov. 5-8

91.Yeau-Ren Jeng, 2008, “Exploring Mechanical Property and Interfacial Phenomena of Nano-Structures Using Nanomechanics,” The Joint IIAS and NSC-NSF SBE&S Workshops, Tainan, Taiwan, Feb. 18-20

92.W. Y. Jywe, H. H. Jwo, J. C. Shen, Yeau-Ren Jeng, C. H. Liu, Y. F. Teng, Y. T. Jian, and H. S. Wang, 2008, “Development of a Novel Multi-Axis Nano-Positioning Stage,” Asia-Pacific Conference on Transducers and Micro-Nano Technology, Tainan, Taiwan, June 22-25

93.W. Y. Jywe, H. H. Jwo, C. H. Liu, T. H Hsu, Yeau-Ren Jeng, B. J. Lin, Y. S. Li, M. T. Lee, and C. N. Huang, 2008, “A 3D Error Measurement System for CNC Machining Tools,” International Symposium on Instrument Science and Technology ISIST 2008 in Shenyang ( Mukden ), Liaoning Province, China, Sept. 15-18

94.C. H. Liu, W. Y. Jywe, T. H. Hsu, Yeau-Ren Jeng, L. L. Duan, H. L. Huang, and M. S. Wang, 2008, ”The Application of the Dual-Beam Laser Interferometer for Calibration Precision Machine Tools,” International Conference on Precision Measurement, IImenau, Germany, Sept.

95.Yeau-Ren Jeng, and P. Y. Huang, 2008, “Investigation of Particle Removal during Post-CMP Cleaning Process,” International Conference on Planarization/CMP Technology, Hsinchu, Taiwan, Nov. 11

96.Yeau-Ren Jeng, 2009, “A Multi-scale Perspective on Asperity Contact: A Study of Two Configurations,” International Conference on Computational & Experimental Engineering and Science (ICCES’09), Phuket, Thailand, April 8-13

97.Yeau-Ren Jeng, 2009, “Investigation into the Lateral Junction Growth of Single Asperity Contact Using Static Atomistic Simulations,” World Tribology Congress 2009, Kyoto, Japan, Sept. 6-11

98.Yeau-Ren Jeng and S. R. Peng, 2009, “Molecular Simulation of Asperity Contacts: A Study of Two Configurations,” STLE /ASME International Joint Tribology Confere, Tenness, U.S.A., Oct. 19-21

99.Wen-Yuh Jywe, Jeffrey Yang, Chien-Hung Liu, Shang-Liang Chen, Tung Hsien Hsieh, Yeau-Ren Jeng and Yun-Feng Teng , 2009 , “Development of the long-stroke 3-DOF nano stage for the laser direct writing system”,, Automation 2009 - The 10th International Conference on Automation Technology, National Cheng Kung University, Tainan, Taiwan, June 27-29

100.Yeau-Ren Jeng, Pay-Yau Huang and Hung-Jung Tsai, 2010,“The Material Removal Rate of Metal Polishing Process,” 2010 International Conference of Advanced Manufacturing, Kenting, Taiwan, Feb. 2-5.

101.黃培堯, 鄭友仁, 蔡宏榮, 2010, “研磨墊及研磨漿效應對研磨製程溫昇之探討,” 2010 台灣與阿里山國際觀光產業研討會, 嘉義,台灣, Mar. 27.

102.Hung-Jung Tsai, Jeng-Haur Horng, Hung-Cheng Tsai,Shun-Jung Chiu and Pay-Yau Huang, 2010, “Effect of Shear and Thermal Characteristics on Chemical Mechanical Polishing,”The 13th International Symposium on Advances in Abrasive Technology, (ISAAT2010) , Taipei, Taiwan, Sept. 19-22.

103.鄭友仁, 黃培堯, 蔡宏榮, 2010, “精密研磨測試平台開發,” 2010全國精密製造研討會SME 2010, 台北, 台灣, Nov. 6.

104.鄭友仁, 黃培堯, 潘文玨, 詹彥彬, 2010, “狹縫式塗佈製程噴嘴流場模擬,” The 34th National Conference on Theoretical and Applied Mechanics, 雲林, 台灣, Nov. 19-20

105.鄭友仁, 黃培堯, 潘文玨, 詹彥彬, 2010, “狹縫式塗佈製程噴嘴幾何設計模擬,” The International Conference on Safety and Security Management and Engineering Technology, Chia-Yi, Taiwan, Nov 25-26.

106.黃培堯, 蔡宏榮, 鄭友仁, 陳永昌, 2010, “晶圓平坦化製程之研磨界面潤滑分析,” 中國機械工程學會第二十七屆全國學術研討會,台北, 台灣, Dec, 10-11.